Full control over quality and lead time starts with keeping operations in-house. That is why Van Loock Motoren performs all machining itself, in a specially equipped section of our workshop. This enables us to intervene quickly and accurately in the event of damage or wear to rotating components.
Our workshop is equipped with three powerful lathes, including a conventional lathe with a swing diameter of 2,200 mm and a centre distance of 6 metres, suitable for parts up to 20 tonnes. These machines enable us to machine components such as motor shafts, end shields and bearing housings with high precision.
In addition, we have balancing machines that can balance rotating components up to 20 tonnes and 3,000 RPM. This is essential to minimise vibrations and extend the lifespan of your machines.
With these advanced facilities and our expertise, we guarantee that your electric motors and rotating machines are repaired quickly and efficiently, ensuring they once again perform optimally in your industrial processes.
At Van Loock Motoren we combine over four decades of experience with in-depth technical knowledge to deliver overhauls of rotating electrical machines perfectly tailored to your needs. From high-voltage motors to rotary converters: each project is carried out with the same care, precision and attention to quality. Regardless of brand or type, you can count on a sustainable solution that keeps your business processes running smoothly.
To carry out every project efficiently and to the highest quality standards, we have advanced facilities and technical installations at our disposal:
| Feature | Specification |
|---|---|
| Workshop size | 6,000 m², lifting height 8.8 m |
| Weight capacity | Up to 40 tonnes |
| Voltage capacity | Up to 11 kV |
| Indoor steam cleaning bay | For thorough cleaning (max. h. 3.0 m, w. 6.0 m, d. 4.0 m) |
| 3 Drying ovens | Optimal moisture removal through step-by-step heating (online monitoring) |
| 2 Vacuum Pressure Impregnation installations | Epoxy resin (11 kV, dia. 2.5 m, depth 4.6 m) |
| 3 Test bays | For extensive load testing prior to delivery (1 MW, 1000 kVA, 3000 RPM, 50/60 Hz) |
| 3 Balancing machines | Up to 20 tonnes, 3000 RPM | Machining | Lathes up to 20 tonnes, dia. 2.2 m |
| Spray booth | High-level protection and finishing |
| Pyrolysis oven | w: 3.0 m, d: 2.5 m, h: 2.5 m. |
